Cartridge for Airbag vest - Hit Air

The connector ball assembly is an attachment element for Hit-Air airbags. First option : attach the connector ball assembly to the connecting strap, which is attached to the saddle cord. Option two : attach it to the Hit-Air all-in-one belt.

This extension loop set will allow you to open the two front buckles of your vests. Thus, you will gain up to 15 cm of comfort at the level of the chest and waist. This extension loop set is ideal if you are too small in the standard sizes we offer. It is also interesting to adapt your airbag vest to each season, depending on the layers of clothing under your vest.

The connecting strap connects the airbag vest to the attachment point of the saddle cord. It must be attached to the 3rd attachment element : the Hit-Air ball connector assembly.

The saddle cord is used to attach the connection strap to the gas cartridge.

The Hit-Air all-in-one belt is a full-fledged attachment element for Hit-Air airbags. It combines both the saddle cord and the connecting strap. It must be connected to the ball connector assembly.

The screw is inserted in the lower part of the control box and allows the firing pin to be reset so that the ball/connector system can be reinserted into the housing provided for this purpose.

The removable and lightweight Hit-Air back protection is designed to attach to the back of the riding airbag vest. It maximizes the protection of the spine in case of impact.